/* *Copyright ,2023 , NANOCHAP *File name: ENS1_ANAC.H *Author: *Version: V1.0 *Date: 2023-11- *Description: *Function List: History: 1.V1.0 Date: Author: Modification: 初版 */ #ifndef ENS1_ANAC_H #define ENS1_ANAC_H #include #include "CMSDK_CM0.h" #include "my_header.h" #include "ENS1_GPIO.h" /*-------------------boost------------------------*/ extern uint8_t Boost_Voltage_Sel(uint8_t VOLTAGE_XV); #define VOLTAGE_11V 0x0 #define VOLTAGE_15V 0x1 #define VOLTAGE_26V 0x2 #define VOLTAGE_45V 0x3 #define VOLTAGE_55V 0x4 /*-------------------比较器------------------------*/ /* 比较器IO复用说明 GPIO12 -- COMP1_VIP0 GPIO13 -- COMP1_VIP1 GPIO14 -- COMP1_VIN0 GPIO15 -- COMP1_VIN1 GPIO21 -- COMP1_OUT GPIO8 -- COMP0_VIP0 GPIO9 -- COMP0_VIP1 GPIO10 -- COMP0_VIN0 GPIO11 -- COMP0_VIN1 GPIO20 -- COMP0_OUT */ #define COMP_VREF_VOLTAGE_0_3v (uint8_t)(0x0) #define COMP_VREF_VOLTAGE_0_6v (uint8_t)(0x1) #define COMP_VREF_VOLTAGE_0_9v (uint8_t)(0x2) #define COMP_VREF_VOLTAGE_1_2v (uint8_t)(0x3) #define COMP_VREF_VOLTAGE_1_5v (uint8_t)(0x4) #define COMP_VREF_VOLTAGE_1_8v (uint8_t)(0x5) #define COMP_VREF_VOLTAGE_2_1v (uint8_t)(0x6) #define COMP_VREF_VOLTAGE_2_4v (uint8_t)(0x7) #define COMP_NEG_INPUT_VIN0 (uint8_t)(0x0) #define COMP_NEG_INPUT_VIN1 (uint8_t)(0x1) #define COMP_NEG_INPUT_VREF (uint8_t)(0x2) #define COMP_POS_INPUT_VIP0 (uint8_t)(0x1) #define COMP_POS_INPUT_VIP1 (uint8_t)(0x2) typedef enum{COMP0=0, COMP1}COMP_NUM; typedef struct COMPConfig { COMP_NUM COMPARATOR_NUM; uint8_t COMP_VREF_SEL; uint8_t COMP_SIGSEL_NEGATIVE_INPUT_SEL; uint8_t COMP_SIGSEL_POSITIVE_INPUT_SEL; }COMP_ConfigStructure; /*比较器的输出设置*/ extern void CompInitSet(COMP_ConfigStructure* COMPCONFIG); /*读比较结果*/ extern uint8_t Read_Comp_Output(COMP_NUM NUM); /*开启/关闭比较器*/ extern void CompControl(COMP_NUM NUM ,FunctionalState Newstate); /*-----------------------------PGA------------------------------*/ /* PGA IO复用说明 GPIO16 -- PGA_VIP0 //输入信号直连 GPIO18 -- PGA_VIN0 //需要接入电阻 GPIO17 -- PGA_VIP1 //输入信号直连 GPIO19 -- PGA_VIN1 //需要接入电阻 GPIO20 -- PGA_EXVCM GPIO4 -- PGA_OUT */ //#define PGA_POSITIVE_INPUT_VBAT (uint8_t)(0x3) //#define PGA_POSITIVE_INPUT_AVDD1P8 (uint8_t)(0x4) //#define PGA_POSITIVE_INPUT_VLCD0 (uint8_t)(0x5) //#define PGA_POSITIVE_INPUT_V_TEMP (uint8_t)(0x7) //PGA放大倍数选择 ，对于反相模式： 1-8 倍， 同相模式2-9倍 #define PGA_GAIN_1X_2X (uint8_t)(0x0) #define PGA_GAIN_2X_3X (uint8_t)(0x1) #define PGA_GAIN_3X_4X (uint8_t)(0x2) #define PGA_GAIN_4X_5X (uint8_t)(0x3) #define PGA_GAIN_5X_6X (uint8_t)(0x4) #define PGA_GAIN_6X_7X (uint8_t)(0x5) #define PGA_GAIN_7X_8X (uint8_t)(0x6) #define PGA_GAIN_8X_9X (uint8_t)(0x7) typedef enum{PGA_NEGATIVE_INPUT_PGA_VIN0 = 0,PGA_NEGATIVE_INPUT_PGA_VIN1, PGA_NEGATIVE_INPUT_INTERNAL_VCM,PGA_NEGATIVE_INPUT_EXTERNAL_VCM}PGA_NEG_SEL; typedef enum{PGA_POSITIVE_INPUT_PGA_VIP0 = 0,PGA_POSITIVE_INPUT_PGA_VIP1=1,PGA_POSITIVE_INPUT_INTERNAL_VCM=2,PGA_POSITIVE_INPUT_VREF1_2V=6}PGA_POS_SEL; typedef enum{PGA_TO_GPIO4=0 , PGA_TO_ADC=1}PGA_OUTPUT_SEL; typedef struct PGAConfig { PGA_NEG_SEL PGA_NEG_SELx ; PGA_POS_SEL PGA_POS_SELx ; uint8_t PGA_GAIN_SEL ; PGA_OUTPUT_SEL PGA_OUT ; }PGA_ConfigStructure; //初始化 extern void PGAInitSet(PGA_ConfigStructure* PGACONFIG ); //PGA开关控制 extern void PGAControl(FunctionalState Newstate); /*--------------------------低电压与芯片过温检测-------------------------*/ void PMU_TEMP150C_TRIGControl(FunctionalState Newstate); //过温检测功能开启与关闭 //返回温度是否超过150度的状态值 int8_t TEMP_150C_TRIG_SIGNAL(void); #define LVD_4P2V (uint8_t)(0x0) #define LVD_3P9V (uint8_t)(0x1) #define LVD_3P6V (uint8_t)(0x2) #define LVD_3P3V (uint8_t)(0x3) #define LVD_3P0V (uint8_t)(0x4) #define LVD_2P7V (uint8_t)(0x5) #define LVD_2P4V (uint8_t)(0x6) #define LVD_2P1V (uint8_t)(0x7) //低电压告警 //设置阈值电压 void LVD_InitSet(uint8_t Threshold_voltage); //打开或关闭此功能 void PMU_LVD_Control(FunctionalState Newstate); //读取低电压状态 uint8_t Read_LVD_Signal(void); /*-------------------------带隙BUFFER启用或关闭-------------------------*/ void PMU_BANDGAP_CONTROL(FunctionalState Newstate); #endif