Stimulate/build/log/idf_py_stdout_output_6760

Command: C:\Espressif\python_env\idf5.5_py3.11_env\Scripts\python.exe C:\Espressif\frameworks\esp-idf-v5.5\tools/idf_monitor.py -p COM16 -b 115200 --toolchain-prefix xtensa-esp32s3-elf- --target esp32s3 --revision 0 C:\Users\29096\Desktop\work\SIM\SIM_S3_1\build\SIM_S3_1.elf C:\Users\29096\Desktop\work\SIM\SIM_S3_1\build\bootloader\bootloader.elf --force-color -m 'C:\Espressif\python_env\idf5.5_py3.11_env\Scripts\python.exe' 'C:\Espressif\frameworks\esp-idf-v5.5\tools\idf.py' '-p' 'COM16'
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0xb (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
[0;32mI (24) boot: ESP-IDF v5.5 2nd stage bootloader[0m
[0;32mI (25) boot: compile time Sep 25 2025 10:34:17[0m
[0;32mI (25) boot: Multicore bootloader[0m
[0;32mI (25) boot: chip revision: v0.2[0m
[0;32mI (27) boot: efuse block revision: v1.3[0m
[0;32mI (31) boot.esp32s3: Boot SPI Speed : 80MHz[0m
[0;32mI (35) boot.esp32s3: SPI Mode       : DIO[0m
[0;32mI (39) boot.esp32s3: SPI Flash Size : 8MB[0m
[0;32mI (42) boot: Enabling RNG early entropy source...[0m
[0;32mI (47) boot: Partition Table:[0m
[0;32mI (50) boot: ## Label            Usage          Type ST Offset   Length[0m
[0;32mI (56) boot:  0 nvs              WiFi data        01 02 00009000 00006000[0m
[0;32mI (62) boot:  1 phy_init         RF data          01 01 0000f000 00001000[0m
[0;32mI (69) boot:  2 factory          factory app      00 00 00010000 00300000[0m
[0;32mI (75) boot:  3 storage          Unknown data     01 82 00310000 00300000[0m
[0;32mI (82) boot: End of partition table[0m
[0;32mI (85) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0e9c4h ( 59844) map[0m
[0;32mI (103) esp_image: segment 1: paddr=0001e9ec vaddr=3fc9b600 size=0162ch (  5676) load[0m
[0;32mI (105) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=22108h (139528) map[0m
[0;32mI (132) esp_image: segment 3: paddr=00042130 vaddr=3fc9cc2c size=01cach (  7340) load[0m
[0;32mI (134) esp_image: segment 4: paddr=00043de4 vaddr=40378000 size=135e8h ( 79336) load[0m
[0;32mI (153) esp_image: segment 5: paddr=000573d4 vaddr=600fe000 size=00020h (    32) load[0m
[0;32mI (161) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (161) boot: Disabling RNG early entropy source...[0m
[0;32mI (171) octal_psram: vendor id    : 0x0d (AP)[0m
[0;32mI (172) octal_psram: dev id       : 0x02 (generation 3)[0m
[0;32mI (172) octal_psram: density      : 0x03 (64 Mbit)[0m
[0;32mI (177) octal_psram: good-die     : 0x01 (Pass)[0m
[0;32mI (182) octal_psram: Latency      : 0x01 (Fixed)[0m
[0;32mI (187) octal_psram: VCC          : 0x01 (3V)[0m
[0;32mI (192) octal_psram: SRF          : 0x01 (Fast Refresh)[0m
[0;32mI (198) octal_psram: BurstType    : 0x01 (Hybrid Wrap)[0m
[0;32mI (204) octal_psram: BurstLen     : 0x01 (32 Byte)[0m
[0;32mI (209) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)[0m
[0;32mI (215) octal_psram: DriveStrength: 0x00 (1/1)[0m
[0;32mI (221) MSPI Timing: PSRAM timing tuning index: 5[0m
[0;32mI (226) esp_psram: Found 8MB PSRAM device[0m
[0;32mI (231) esp_psram: Speed: 80MHz[0m
[0;32mI (235) cpu_start: Multicore app[0m
[0;32mI (540) esp_psram: SPI SRAM memory test OK[0m
[0;32mI (549) cpu_start: Pro cpu start user code[0m
[0;32mI (549) cpu_start: cpu freq: 240000000 Hz[0m
[0;32mI (549) app_init: Application information:[0m
[0;32mI (552) app_init: Project name:     SIM_S3_1[0m
[0;32mI (557) app_init: App version:      1[0m
[0;32mI (561) app_init: Compile time:     Sep 25 2025 10:24:01[0m
[0;32mI (567) app_init: ELF file SHA256:  e75a57fef...[0m
[0;32mI (572) app_init: ESP-IDF:          v5.5[0m
[0;32mI (577) efuse_init: Min chip rev:     v0.0[0m
[0;32mI (582) efuse_init: Max chip rev:     v0.99 [0m
[0;32mI (587) efuse_init: Chip rev:         v0.2[0m
[0;32mI (592) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (599) heap_init: At 3FC9F2C8 len 0004A448 (297 KiB): RAM[0m
[0;32mI (605) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM[0m
[0;32mI (611) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM[0m
[0;32mI (617) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator[0m
[0;32mI (625) spi_flash: detected chip: boya[0m
[0;32mI (629) spi_flash: flash io: dio[0m
[0;33mW (633) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`[0m
[0;32mI (644) sleep_gpio: Configure to isolate all GPIO pins in sleep state[0m
[0;32mI (651) sleep_gpio: Enable automatic switching of GPIO sleep configuration[0m
[0;32mI (659) coexist: coex firmware version: 831ec70[0m
[0;32mI (667) coexist: coexist rom version e7ae62f[0m
[0;32mI (669) main_task: Started on CPU0[0m
[0;32mI (679) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations[0m
[0;32mI (679) main_task: Calling app_main()[0m
[0;32mI (689) MAIN: Starting ECG application...[0m
[0;32mI (689) SPI2: SPI and AD5328BRUZ initialized successfully.[0m
[0;32mI (699) MAIN: Hardware initialization completed.[0m
[0;32mI (699) MAIN: === ECG Generation Test ===[0m
[0;32mI (709) MAIN: ECG Parameters:[0m
[0;32mI (709) MAIN:   Heart Rate: 75.0 BPM[0m
[0;32mI (719) MAIN:   Amplitude: 1.0 V[0m
[0;32mI (719) MAIN:   Sample Rate: 250.0 Hz[0m
[0;32mI (719) MAIN: ECG timer started at 250Hz (4ms period)[0m
[0;32mI (729) MAIN: ECG generation is now running...[0m
[0;32mI (729) MAIN: Starting LED status indicator...[0m
[0;32mI (1619) MAIN: ECG Timer: 224 samples in 1s (224.0 Hz)[0m
[0;32mI (2619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (3619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (4619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (5619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (6619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (7619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (8619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (9619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (10619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (11619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (12619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (13619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (14619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (15619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (16619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (17619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (18619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (19619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (20619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (20739) MAIN: DRAM Total: 367411 bytes, Used: 56148 bytes, Free: 311263 bytes,  DRAM_Largest_block: 249856 bytes[0m
[0;32mI (20739) MAIN: DRAM Used: 15.28%[0m
[0;32mI (20739) MAIN: PSRAM Total: 8388608 bytes, Used: 2672 bytes, Free: 8385936 bytes, PSRAM_Largest_block: 8257536 bytes[0m
[0;32mI (20749) MAIN: PSRAM Used: 0.03%[0m
[0;32mI (21619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (22619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (23619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (24619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (25619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (26619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m
[0;32mI (27619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)[0m