Command: C:\Espressif\python_env\idf5.5_py3.11_env\Scripts\python.exe C:\Espressif\frameworks\esp-idf-v5.5\tools/idf_monitor.py -p COM16 -b 115200 --toolchain-prefix xtensa-esp32s3-elf- --target esp32s3 --revision 0 C:\Users\29096\Desktop\work\SIM\SIM_S3_1\build\SIM_S3_1.elf C:\Users\29096\Desktop\work\SIM\SIM_S3_1\build\bootloader\bootloader.elf --force-color -m 'C:\Espressif\python_env\idf5.5_py3.11_env\Scripts\python.exe' 'C:\Espressif\frameworks\esp-idf-v5.5\tools\idf.py' '-p' 'COM16'
EESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0xb (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (24) boot: ESP-IDF v5.5 2nd stage bootloader
I (25) boot: compile time Sep 25 2025 10:34:17
I (25) boot: Multicore bootloader
I (25) boot: chip revision: v0.2
I (27) boot: efuse block revision: v1.3
I (31) boot.esp32s3: Boot SPI Speed : 80MHz
I (35) boot.esp32s3: SPI Mode       : DIO
I (39) boot.esp32s3: SPI Flash Size : 8MB
I (42) boot: Enabling RNG early entropy source...
I (47) boot: Partition Table:
I (50) boot: ## Label            Usage          Type ST Offset   Length
I (56) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (62) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (69) boot:  2 factory          factory app      00 00 00010000 00300000
I (75) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (82) boot: End of partition table
I (85) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (103) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (105) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (132) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (134) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (153) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (161) boot: Loaded app from partition at offset 0x10000
I (161) boot: Disabling RNG early entropy source...
I (171) octal_psram: vendor id    : 0x0d (AP)
I (171) octal_psram: dev id       : 0x02 (generation 3)
I (172) octal_psram: density      : 0x03 (64 Mbit)
I (177) octal_psram: good-die     : 0x01 (Pass)
I (182) octal_psram: Latency      : 0x01 (Fixed)
I (187) octal_psram: VCC          : 0x01 (3V)
I (192) octal_psram: SRF          : 0x01 (Fast Refresh)
I (198) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (204) octal_psram: BurstLen     : 0x01 (32 Byte)
I (209) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (215) octal_psram: DriveStrength: 0x00 (1/1)
I (221) MSPI Timing: PSRAM timing tuning index: 5
I (226) esp_psram: Found 8MB PSRAM device
I (231) esp_psram: Speed: 80MHz
I (235) cpu_start: Multicore app
I (540) esp_psram: SPI SRAM memory test OK
I (549) cpu_start: Pro cpu start user code
I (549) cpu_start: cpu freq: 240000000 Hz
I (549) app_init: Application information:
I (552) app_init: Project name:     SIM_S3_1
I (557) app_init: App version:      1
I (561) app_init: Compile time:     Sep 25 2025 10:24:01
I (567) app_init: ELF file SHA256:  cc0e0d34f...
I (572) app_init: ESP-IDF:          v5.5
I (577) efuse_init: Min chip rev:     v0.0
I (582) efuse_init: Max chip rev:     v0.99 
I (587) efuse_init: Chip rev:         v0.2
I (592) heap_init: Initializing. RAM available for dynamic allocation:
I (599) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (605) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (611) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (617) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (625) spi_flash: detected chip: boya
I (629) spi_flash: flash io: dio
W (633) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (644) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (651) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (659) coexist: coex firmware version: 831ec70
I (667) coexist: coexist rom version e7ae62f
I (669) main_task: Started on CPU0
I (679) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (679) main_task: Calling app_main()
I (689) MAIN: Starting application without display...
I (689) SPI2: SPI and AD5328BRUZ initialized successfully.
I (699) MAIN: Hardware initialization completed. LED and DAC ready.
I (709) MAIN: Starting ECG Waveform Test...
I (709) MAIN: === ECG Waveform Test ===
I (719) MAIN: Testing Normal ECG Waveform...
I (719) ECG_WAVEFORM: ECG generator initialized
I (729) ECG_WAVEFORM: ECG parameters updated
I (729) ECG_WAVEFORM: === ECG参数 ===
I (729) ECG_WAVEFORM: 幅度: 2.0mV
I (739) ECG_WAVEFORM: 心率: 75.0 BPM
I (739) ECG_WAVEFORM: RR间期: 0.80秒
I (749) ECG_WAVEFORM: 偏置: 0.0mV
I (749) ECG_WAVEFORM: 反转: 否
I (759) ECG_WAVEFORM: ECG generator started
I (759) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (769) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 11
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (566) app_init: Compile time:     Sep 25 2025 10:24:01
I (572) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (634) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app
I (544) esp_psram: SPI SRAM memory test OK
I (553) cpu_start: Pro cpu start user code
I (553) cpu_start: cpu freq: 240000000 Hz
I (553) app_init: Application information:
I (556) app_init: Project name:     SIM_S3_1
I (561) app_init: App version:      1
I (565) app_init: Compile time:     Sep 25 2025 10:24:01
I (571) app_init: ELF file SHA256:  cc0e0d34f...
I (577) app_init: ESP-IDF:          v5.5
I (581) efuse_init: Min chip rev:     v0.0
I (586) efuse_init: Max chip rev:     v0.99 
I (591) efuse_init: Chip rev:         v0.2
I (596) heap_init: Initializing. RAM available for dynamic allocation:
I (603) heap_init: At 3FC9F388 len 0004A388 (296 KiB): RAM
I (609) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (615) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (622) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (630) spi_flash: detected chip: boya
I (633) spi_flash: flash io: dio
W (637) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (648) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (655) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (663) coexist: coex firmware version: 831ec70
I (672) coexist: coexist rom version e7ae62f
I (673) main_task: Started on CPU0
I (683) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (683) main_task: Calling app_main()
I (693) MAIN: Starting application without display...
I (693) SPI2: SPI and AD5328BRUZ initialized successfully.
I (703) MAIN: Hardware initialization completed. LED and DAC ready.
I (713) MAIN: Starting ECG Waveform Test...
I (713) MAIN: === ECG Waveform Test ===
I (723) MAIN: Testing Normal ECG Waveform...
I (723) ECG_WAVEFORM: ECG generator initialized
I (733) ECG_WAVEFORM: ECG parameters updated
I (733) ECG_WAVEFORM: === ECG参数 ===
I (733) ECG_WAVEFORM: 幅度: 2.0mV
I (743) ECG_WAVEFORM: 心率: 75.0 BPM
I (743) ECG_WAVEFORM: RR间期: 0.80秒
I (753) ECG_WAVEFORM: 偏置: 0.0mV
I (753) ECG_WAVEFORM: 反转: 否
I (763) ECG_WAVEFORM: ECG generator started
I (763) MAIN: Generating continuous ECG waveform (250Hz via vTaskDelayUntil)...
I (773) MAIN: ECG loop started, period_ticks=0

assert failed: xTaskDelayUntil tasks.c:1499 (( xTimeIncrement > 0U ))


Backtrace: 0x40379de1:0x3fca2cd0 0x40381445:0x3fca2cf0 0x40388ee9:0x3fca2d10 0x40383a56:0x3fca2e30 0x4200a1e2:0x3fca2e50 0x4200a24b:0x3fca2eb0 0x42021080:0x3fca2ed0 0x40381e7d:0x3fca2f00




ELF file SHA256: cc0e0d34f

Rebooting...
���ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
Saved PC:0x40379d21
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (29) boot: ESP-IDF v5.5 2nd stage bootloader
I (29) boot: compile time Sep 25 2025 10:34:17
I (29) boot: Multicore bootloader
I (29) boot: chip revision: v0.2
I (32) boot: efuse block revision: v1.3
I (36) boot.esp32s3: Boot SPI Speed : 80MHz
I (39) boot.esp32s3: SPI Mode       : DIO
I (43) boot.esp32s3: SPI Flash Size : 8MB
I (47) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (60) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (67) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (73) boot:  2 factory          factory app      00 00 00010000 00300000
I (80) boot:  3 storage          Unknown data     01 82 00310000 00300000
I (86) boot: End of partition table
I (90) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0ec74h ( 60532) map
I (108) esp_image: segment 1: paddr=0001ec9c vaddr=3fc9b700 size=0137ch (  4988) load
I (109) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=21fe4h (139236) map
I (137) esp_image: segment 3: paddr=0004200c vaddr=3fc9ca7c size=01f5ch (  8028) load
I (139) esp_image: segment 4: paddr=00043f70 vaddr=40378000 size=13694h ( 79508) load
I (158) esp_image: segment 5: paddr=0005760c vaddr=600fe000 size=00020h (    32) load
I (165) boot: Loaded app from partition at offset 0x10000
I (166) boot: Disabling RNG early entropy source...
I (176) octal_psram: vendor id    : 0x0d (AP)
I (176) octal_psram: dev id       : 0x02 (generation 3)
I (176) octal_psram: density      : 0x03 (64 Mbit)
I (181) octal_psram: good-die     : 0x01 (Pass)
I (186) octal_psram: Latency      : 0x01 (Fixed)
I (191) octal_psram: VCC          : 0x01 (3V)
I (196) octal_psram: SRF          : 0x01 (Fast Refresh)
I (202) octal_psram: BurstType    : 0x01 (Hybrid Wrap)
I (208) octal_psram: BurstLen     : 0x01 (32 Byte)
I (214) octal_psram: Readlatency  : 0x02 (10 cycles@Fixed)
I (220) octal_psram: DriveStrength: 0x00 (1/1)
I (226) MSPI Timing: PSRAM timing tuning index: 5
I (230) esp_psram: Found 8MB PSRAM device
I (235) esp_psram: Speed: 80MHz
I (239) cpu_start: Multicore app