Stimulate/build/log/idf_py_stdout_output_6760

119 lines
7.6 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Command: C:\Espressif\python_env\idf5.5_py3.11_env\Scripts\python.exe C:\Espressif\frameworks\esp-idf-v5.5\tools/idf_monitor.py -p COM16 -b 115200 --toolchain-prefix xtensa-esp32s3-elf- --target esp32s3 --revision 0 C:\Users\29096\Desktop\work\SIM\SIM_S3_1\build\SIM_S3_1.elf C:\Users\29096\Desktop\work\SIM\SIM_S3_1\build\bootloader\bootloader.elf --force-color -m 'C:\Espressif\python_env\idf5.5_py3.11_env\Scripts\python.exe' 'C:\Espressif\frameworks\esp-idf-v5.5\tools\idf.py' '-p' 'COM16'
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0xb (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x159c
load:0x403c8700,len:0xd24
load:0x403cb700,len:0x2f48
entry 0x403c8924
I (24) boot: ESP-IDF v5.5 2nd stage bootloader
I (25) boot: compile time Sep 25 2025 10:34:17
I (25) boot: Multicore bootloader
I (25) boot: chip revision: v0.2
I (27) boot: efuse block revision: v1.3
I (31) boot.esp32s3: Boot SPI Speed : 80MHz
I (35) boot.esp32s3: SPI Mode : DIO
I (39) boot.esp32s3: SPI Flash Size : 8MB
I (42) boot: Enabling RNG early entropy source...
I (47) boot: Partition Table:
I (50) boot: ## Label Usage Type ST Offset Length
I (56) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (62) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (69) boot: 2 factory factory app 00 00 00010000 00300000
I (75) boot: 3 storage Unknown data 01 82 00310000 00300000
I (82) boot: End of partition table
I (85) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0e9c4h ( 59844) map
I (103) esp_image: segment 1: paddr=0001e9ec vaddr=3fc9b600 size=0162ch ( 5676) load
I (105) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=22108h (139528) map
I (132) esp_image: segment 3: paddr=00042130 vaddr=3fc9cc2c size=01cach ( 7340) load
I (134) esp_image: segment 4: paddr=00043de4 vaddr=40378000 size=135e8h ( 79336) load
I (153) esp_image: segment 5: paddr=000573d4 vaddr=600fe000 size=00020h ( 32) load
I (161) boot: Loaded app from partition at offset 0x10000
I (161) boot: Disabling RNG early entropy source...
I (171) octal_psram: vendor id : 0x0d (AP)
I (172) octal_psram: dev id : 0x02 (generation 3)
I (172) octal_psram: density : 0x03 (64 Mbit)
I (177) octal_psram: good-die : 0x01 (Pass)
I (182) octal_psram: Latency : 0x01 (Fixed)
I (187) octal_psram: VCC : 0x01 (3V)
I (192) octal_psram: SRF : 0x01 (Fast Refresh)
I (198) octal_psram: BurstType : 0x01 (Hybrid Wrap)
I (204) octal_psram: BurstLen : 0x01 (32 Byte)
I (209) octal_psram: Readlatency : 0x02 (10 cycles@Fixed)
I (215) octal_psram: DriveStrength: 0x00 (1/1)
I (221) MSPI Timing: PSRAM timing tuning index: 5
I (226) esp_psram: Found 8MB PSRAM device
I (231) esp_psram: Speed: 80MHz
I (235) cpu_start: Multicore app
I (540) esp_psram: SPI SRAM memory test OK
I (549) cpu_start: Pro cpu start user code
I (549) cpu_start: cpu freq: 240000000 Hz
I (549) app_init: Application information:
I (552) app_init: Project name: SIM_S3_1
I (557) app_init: App version: 1
I (561) app_init: Compile time: Sep 25 2025 10:24:01
I (567) app_init: ELF file SHA256: e75a57fef...
I (572) app_init: ESP-IDF: v5.5
I (577) efuse_init: Min chip rev: v0.0
I (582) efuse_init: Max chip rev: v0.99 
I (587) efuse_init: Chip rev: v0.2
I (592) heap_init: Initializing. RAM available for dynamic allocation:
I (599) heap_init: At 3FC9F2C8 len 0004A448 (297 KiB): RAM
I (605) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (611) heap_init: At 600FE020 len 00001FC8 (7 KiB): RTCRAM
I (617) esp_psram: Adding pool of 8192K of PSRAM memory to heap allocator
I (625) spi_flash: detected chip: boya
I (629) spi_flash: flash io: dio
W (633) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
I (644) sleep_gpio: Configure to isolate all GPIO pins in sleep state
I (651) sleep_gpio: Enable automatic switching of GPIO sleep configuration
I (659) coexist: coex firmware version: 831ec70
I (667) coexist: coexist rom version e7ae62f
I (669) main_task: Started on CPU0
I (679) esp_psram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (679) main_task: Calling app_main()
I (689) MAIN: Starting ECG application...
I (689) SPI2: SPI and AD5328BRUZ initialized successfully.
I (699) MAIN: Hardware initialization completed.
I (699) MAIN: === ECG Generation Test ===
I (709) MAIN: ECG Parameters:
I (709) MAIN: Heart Rate: 75.0 BPM
I (719) MAIN: Amplitude: 1.0 V
I (719) MAIN: Sample Rate: 250.0 Hz
I (719) MAIN: ECG timer started at 250Hz (4ms period)
I (729) MAIN: ECG generation is now running...
I (729) MAIN: Starting LED status indicator...
I (1619) MAIN: ECG Timer: 224 samples in 1s (224.0 Hz)
I (2619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (3619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (4619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (5619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (6619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (7619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (8619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (9619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (10619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (11619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (12619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (13619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (14619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (15619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (16619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (17619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (18619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (19619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (20619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (20739) MAIN: DRAM Total: 367411 bytes, Used: 56148 bytes, Free: 311263 bytes, DRAM_Largest_block: 249856 bytes
I (20739) MAIN: DRAM Used: 15.28%
I (20739) MAIN: PSRAM Total: 8388608 bytes, Used: 2672 bytes, Free: 8385936 bytes, PSRAM_Largest_block: 8257536 bytes
I (20749) MAIN: PSRAM Used: 0.03%
I (21619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (22619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (23619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (24619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (25619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (26619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)
I (27619) MAIN: ECG Timer: 250 samples in 1s (250.0 Hz)